Do Ring Doorbell No-Drill Mounts Work?

On this page (7 sections)

1. How does a Ring doorbell no-drill mount work?
2. Which surfaces work with an adhesive Ring mount?
3. When does a clamp mount suit an apartment door?
4. Which Ring doorbells fit the adhesive mount?
5. How should you choose and set up a no-drill mount?
6. What mistakes make no-drill mounts a poor fit?
7. Do Ring doorbell no-drill mounts work for your setup?

Yes, a Ring doorbell no-drill mount can work when the mount matches both the doorbell and the place you want to attach it. An adhesive mount needs a smooth, even wall; a clamp needs a compatible in-swinging door with the right dimensions.

The choice comes down to two checks: identify the exact doorbell model, then inspect or measure the mounting spot. A mount that avoids drilling still needs a suitable surface and a secure fit.

How does a Ring doorbell no-drill mount work?

A no-drill mount holds a doorbell with adhesive or a door clamp instead of screws in the wall. Adhesive works on a qualifying wall, while a clamp grips the edge of a door that fits its shape and size limits.

Ring's No Drill Mount attaches to the wall with adhesive strips, and the compatible doorbell attaches to the mount. Ring describes the adhesive as strong and non-damaging, and gives a removal method: detach the doorbell, then pull down on the strips.

A clamp mount attaches at the door edge. It avoids sticking hardware to the wall, but the door's swing, edge, thickness, and gap determine whether it fits.

For other ways to outfit a compatible doorbell, browse our guide to Ring doorbell accessories. If you're still deciding which camera to buy, compare Ring doorbells for different front doors.

Which surfaces work with an adhesive Ring mount?

A smooth, even wall is the best match for Ring's adhesive mount. Brick, shingles, and rough stucco can weaken adhesion because the mount cannot make even contact across a rough surface.

Inspect the specific patch where the mount will sit. A nearby smooth section won't help if the mount itself has to bridge a textured edge, uneven area, or change in wall angle.

Think about the finish as well as the texture. If you are unsure whether the adhesive suits that surface, follow Ring's instructions and choose another mounting method rather than expecting the strips to compensate for a poor fit.

This mount suits renters or homeowners who want to avoid drilling and have a suitable wall patch. Skip it if the only practical location is rough or uneven, or if your doorbell model is outside the compatibility list.

When does a clamp mount suit an apartment door?

A clamp can be useful when you can't attach hardware to the wall, but the door has to meet its fit requirements. The anti-theft option fits left- or right-in-swinging doors with flat edges, from 0.8 to 2.3 inches thick, and a door gap greater than 0.06 inch.

It won't fit an out-swinging door, iron door, screen door, or door with uneven edges. Measure thickness and gap, check the edge, and confirm the swing direction before ordering.

The clamp suits someone who needs a removable mount and has a door that fits those limits. Skip it if the door is metal, has a screen, swings outward, has an uneven edge, or falls outside the stated measurements.

Check your doorbell model too. This mount is made for certain Ring Battery Doorbell, Plus, and Pro models (2nd Gen), plus Blink Video Doorbell (Gen 1); it excludes several older Ring models and wired doorbells.

Plan the camera position before you choose hardware. Our guide to video doorbell height can help you decide where the view should sit.

Which Ring doorbells fit the adhesive mount?

Ring's No Drill Mount fits three specific 2nd Gen battery doorbells. The compatible models are Ring Battery Doorbell (2nd Gen), Battery Doorbell Plus (2nd Gen), and Battery Doorbell Pro (2nd Gen).

A name that sounds similar is not enough to confirm a fit. Check the full model name and generation before buying, especially if you're comparing newer Ring cameras or already own a doorbell.

The Ring Battery Doorbell 2K and 2K Plus are separate models in this guide, and their compatibility with Ring's No Drill Mount isn't established here. Confirm compatibility for the exact model before choosing that mount.

For battery upkeep after installation, see how to charge a Ring doorbell battery. A removable battery or a charging method doesn't by itself confirm that a particular mount fits.

How should you choose and set up a no-drill mount?

Choose the mount only after checking the doorbell model and the mounting spot. Adhesive is the straightforward option for a compatible Ring model on a smooth, even wall; the clamp is for a door that matches its dimensions and shape.

Use this checklist before you buy:

1. Read the full model name and generation on your doorbell or its packaging.
2. For adhesive, check that the exact wall patch is smooth and even.
3. For a clamp, measure the door thickness and gap, and check the swing direction and edge shape.
4. Compare every measurement and compatibility limit with the mount instructions.
5. Choose another compatible method if either the model or mounting spot is outside the requirements.

During setup, follow the instructions for the mount you chose. For the adhesive mount, place it only on a suitable surface and attach the compatible doorbell as directed.

For a clamp, position it on a door that meets its limits and avoid forcing it onto an uneven edge.

A useful care habit is to check that the mount remains in place as part of normal doorbell upkeep. If you remove Ring's adhesive mount, detach the doorbell first and pull down on the strips as Ring directs.

What mistakes make no-drill mounts a poor fit?

The most common mistake is buying by the phrase “Ring compatible” without checking the exact generation or the mounting location. Similar model names can refer to different devices, and the adhesive and clamp options have different restrictions.

Avoid these shortcuts:

• Assuming an adhesive mount will hold on brick, shingles, or rough stucco.
• Measuring door thickness but forgetting the gap, swing direction, or edge shape.
• Assuming a clamp fits a screen, iron, or out-swinging door.
• Treating a battery model as automatically compatible with every Ring mount.
• Forcing a clamp or adhesive mount onto a surface that does not meet its requirements.

If any key detail is uncertain, verify it before ordering. A careful fit check is more useful than discovering after arrival that the wall texture or door shape rules out the mount.

Do Ring doorbell no-drill mounts work for your setup?

Pick Ring's adhesive mount if you have one of its compatible 2nd Gen battery models and a smooth, even wall. Pick the clamp option if your door swings inward, has a flat edge, and meets the stated thickness and gap limits.

Skip both options if your doorbell model or mounting location falls outside those requirements. If you're choosing the camera too, compare Ring models for different front doors; after installation, use our Ring battery charging guide for battery care.

Frequently asked questions

Do Ring no-drill mounts damage walls?

Ring's adhesive-backed No Drill Mount uses non-damaging adhesive and can be removed by detaching the doorbell, then pulling down on the adhesive strips. It works best on smooth, even surfaces; rough textures can affect adhesion strength.

Does Ring's No Drill Mount fit every Ring doorbell?

No. It fits Ring Battery Doorbell (2nd Gen), Battery Doorbell Plus (2nd Gen), and Battery Doorbell Pro (2nd Gen).

Check the exact model and generation before buying, because older models and wired doorbells aren't among the compatible models named for this mount.

Can a clamp mount fit any apartment door?

No. The anti-theft clamp mount fits left- or right-in-swinging doors with flat edges, a thickness from 0.8 to 2.3 inches, and a gap greater than 0.06 inch.

It doesn't fit out-swinging, iron, or screen doors, or doors with uneven edges.

Is a no-drill mount as secure as a screw mount?

A no-drill mount avoids holes, but its hold depends on the mounting method and fit. Ring's adhesive mount works best on smooth, even walls, while a clamp mount needs a door within its size and shape limits.

Follow the mount instructions and check its fit before relying on it.